Відео

Connect to Creality Cloud and plug in a USB webcam. It uploads your timelapse videos

Paygating a calibration feature is ridiculous. It costs them nothing to add it once they've made it

I got my ultra today going to hopefully get time tomorrow to play around with it. Loved your review on the 4 hope you get a ultra to review soon

I have a small child and two cats, and given the number of times those little ninjas have snuck into my room and smashed my fresh prints I'm probably going to try to get the Wargamer resin. I've already purchased a cabinet that locks, but I haven't been able to put it up yet. I'm also really really tired of swords, banners, plumes, crests, and other small bits just snapping as soon as I look at them the wrong way when removing them from a support let alone drop them while painting, so that should help.

A large scalpel would be a utility knife which are either cumbersome where the blade exits the handle (Stanley knife) or flimsy in the equivalent area (snappable blades). The ubiquitous X-Acto #11 blade has perhaps too low an angle (22.5°) so check out the #24 & #19 @ 35° & 55°. The #18 blade is effectively a tiny chisel which may work well so is an actual woodworking chisel an option? Fixed blade options like a time-tested **Hultafors Chisel Knife for $20AUD or the similar Fiskars Staysharp Chisel Knife for $10 more at Bunnings. For an outlier, the Civivi Elementum Utility. At $80AUD it's comparatively expensive but has the advantages of replaceable (Stanley) blades and you can get your Spydie-flick on ;) **Hultafors, Morakniv and others have basic knife ranges with Scandi grinds. Having no secondary bevel gives good leverage and makes sharpening easier. Usually available in Stainless or Carbon steels. Cheers from a wood machinist, knife enthusiast & hobbyist🤘

Any chance fornthe rest of the sttings? I use sunlu abslike and dont get quite that good of a result. Ive done a number of cals and tests, but havent gotten quite there. Im at around 1.8 sec exp. But due to my lack of time and experience, any other values used to get that result would help greatly. Photon mono x 6k is my machine Thanks to anyone for your input.

In your next guide video, can you explain the painting process? I know it doesn't directly tie into 3d printing itself, but I would love to see how you paint your minis.

Anyone else cringe when this guy scratch tf out of the machine when there are far more reasonable ways to determine if something is plastic or metal? Elegoo, please send this mf a refurbished unit that's been sat in the back of QA since beta.

Should turn all the lights off makes it look better, but thats okey since we cant see anything anyways :P

FauxHammer is threatening member's and telling 3d printer company to go f*ck there self ua-cam.com/video/XfyXocgge2s/v-deo.html ua-cam.com/video/d6vAkV1Ajlc/v-deo.htmlfeature=shared

I would NEVER go back to anycubic there customer service is crap. I had one of there printer from filament and rise and both the ones I had never works. The worst experience I ever had

I would NEVER go back to anycubic there customer service is crap. I had one of there printer from filament and rise and both the ones I had never works. The worst experience I ever had was

The M5s pro is fantastic but I've been using the new M7 Pro more.

Thank you for the testing!

Wouldn't recommend anyone get the ultra until the tilt release system has been proven over a few months. Sounds like way too many things to go wrong. Don't be drawn in by the price. Let others waste their money first. There are always sales. There have been reports of damaged screens only on the Ultra models which Elegoo are saying are just production errors. Seems weird it's only the Ultra ones though. People are theorising it's the tilting causing strain of the connector or possibly the spring loaded pressure on the screen required by the tilt mechanism. My only printer is an old mars 2k so was looking to upgrade. Think I'm getting this one over the ultra. Print speed isn't a problem if it means reliable prints. Can leave it on overnight like with my current printer. I don't want resin sloshing around inside the vat, no good will come of that. The idea of a flat plane moving down and pushing resin out in equal amounts sounds more intelligent to me. Don't want lots of moving parts on my budget home devices either. These aren't industrial machines but people treat them as such.

You should do this with the Anycubic M7 Pro.

Will you be reviewing the new Anycubic M7?

its ALL the Rabbit Fault.--------->. Roasted Rabbit With Potatoes : 1 rabbit (2-3 kg) 6 potatoes 1 onion 2 carrots 5 garlic cloves oil bay leaves black pepper salt

i have use Halot box from the start whit auto support, i try lyche multiple fail, i return whit halot box it never fail me . manuel support is just a waste of time for me when halot box do it for you easy whitout fail for me that is , and printing wings whit lots of detail never fail.

I think you are a little too cavalier around UV light, pointing at UV screen with bare hands and probably other exposed skin. It might be too weak to cause damage, but don't risk it. Otherwise, very informative video. Thank you!

I don't know anything about 3d printing and i'm not into TTRPGs but this video was sooo much fun to watch! love your process and honesty!!

BNNUY!!! 🐇

I get your Calibration point, But also I can look up the exposure times needed online

Some time stamps would be wonderful!

SO next video is best resin for 3d printed guitar picks?

I POOR INFLUENCER PLEASE GIVE ME A FREE 3D PRINTER

it's a hobby to be fair, but hopefully a sub-hobby to something else that provides meaningful fulfillment.

Hey, i have an old first gen epax x1, i been out of 3d printing for a while and been looking to get back in, what printer would you recommend as the go to for printing minis now?

there's a silencer you can print for this :)

What are the locations of the four screws to line up with the saturn 4 ultra? I saw that you didn't need to drill holes, but I think I missed which screw orientation that was. Anyone have a link to that explanation?

19:10 Yeah, but did you calibrate your fleshy meatbag eyeballs first? 😂

Takk!

a like for all the work. Well done

CPAP blowers are no joke lol need a muffler like the VZbot

Someone ought to go back and look at CPAP designs. My buddy just found a used CPAP and is leaving it assembled. At full power it's quiet enough to sleep by with some getting used to (obviously).

I suspect Wargamer resin is repackaged Anycubic ABS Like V2, just based on the characteristics.

The group I'm subbed to recommended Siraya fast grey, and it hasn't disappointed me so far.

Dude.... this is awesome. Thank you for the f3d files, now I can play around with turning the vent cap into a Chaos Star, or Khorne symbol. #BloodfortheBloodGod #SkullsforthethroneofKhorne

It's out now! makerworld.com/en/models/487870

Hello! Didn't finish the video yet, but I'm planning a ventilation/extraction system Don't know if I'll exactly use the cut and put the adapter in, but would it be possible to have a working print with resin? I don't have a filament printer yet and I don't know if I can do working parts with it haha thanks! Edit: I'm an idiot, finished watching the video now, thanks again!

Where can I get this its great!!. Also have you thought about doing one for the Saturn 3 and 4???

Just got my saturn 4 ultra :D

Excellent. A very useful vid. I'd love to see a similar study done on different resins dependency on temperature, seeing as it's THE key factor for resin printing for me.

Now I wish my Creality didn't have such a great handle. Those handles are so cool.

Wouldn’t be more important for these companies to implement fume extractors for these printers and maybe then they could sell them separately?

Wow all of this looks super easy I can probably do it blindfold….

This is like HD USB cables. Snake oil.

the pro version came with the power recovery feature??

hello je vais m abonner mec peut tu partager le cercle a l arriere de la s1 stp